What is the difference between translation pattern and route pattern?

The primary difference between route patterns and translation patterns is that translation patterns do not have a final path selection destination (route list, gateway, or trunk). Translation patterns exist only to manipulate digits; they do not perform call routing.

How do you create a translation pattern in Cucm?

To configure a translation pattern, navigate to Call Routing > Translation Pattern, as shown in Figure 12-12. The translation pattern identifies the dialed digit string to match and the calling- or called-party transformation settings that should be applied.

What is voice translation rule?

Voice Translation Rule: A set of up to 100 individual rules (with IOS 15. A Voice Translation Rule will be used to match numbers in a called party, calling party or redirect number. Since it is a set of rules, it can be used to match one or more patterns of numbers and have each pattern manipulated in a different way.

What is called party transform mask?

CUCM overlays the calling or called party number with the transformation mask so that the last character of the mask aligns with the last digit of the calling or called party number. The five-digit extension of 45000 in Figure 11-9 is transformed into a ten-digit pattern for the purposes of caller ID (ANI) on the PSTN.

What are the translations in math?

A translation is a transformation that occurs when a figure is moved from one location to another location without changing its size, shape or orientation. To translate the point P(x,y) , a units right and b units up, use P'(x+a,y+b) .

What is the difference between transformation and translation?

A transformation is an operation that moves, flips, or changes a figure to create a new figure. A rigid transformation is a transformation that preserves size and shape. A translation is a transformation that moves every point in a figure the same distance in the same direction.

What is a dial peer Cisco?

• Plain old telephone system (POTS)—Dial peer that defines the characteristics of a traditional. telephony network connection. POTS dial peers map a dialed string to a specific voice port on the local router, normally the voice port connecting the router to the local PSTN, PBX, or telephone.

What is transformation pattern?

Transformation patterns determine how the system manipulates the digits that were dialed in an incoming or outgoing call. You can configure transformation patterns when you need to change the calling or called number before the system sends it to the phone or the PSTN.