Why does my iPhone 6 not find Wi-Fi?

When your iPhone 6 is not connecting to WiFi, the problem is usually software-related and doesn’t require a physical repair. However, there is a small chance that the antenna which connects your iPhone to WiFi (and Bluetooth) is broken and needs to be fixed.

Why wont my iPhone find Wi-Fi networks?

Reset your Network Settings. If you’re using iOS or iPadOS 15 or later, tap Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.

Why can’t my phone find Wi-Fi networks?

If your Android phone won’t connect to Wi-Fi, you should first make sure that your phone isn’t on Airplane Mode, and that Wi-Fi is enabled on your phone. If your Android phone claims it’s connected to Wi-Fi but nothing will load, you can try forgetting the Wi-Fi network and then connecting to it again.

How do I fix unable to join network on iPhone?

How to Fix an “Unable to Join the Network” Error in iOS

1. Go to Settings > General > Reset > Reset Network Settings.
2. Enter the devices passcode and confirm the reset.
3. Let the iPhone/iPad restart, you’ll see a spinning cursor on the device as it finishes the reset before the device boots back on.

How do I connect iPhone 6 to Wi-Fi?

Select Settings

1. Select Settings.
2. Select Wi-Fi.
3. Set Wi-Fi to ON. Select the wireless network you want to connect to.
4. Enter the Wi-Fi password and select Join. Wi-Fi Password.
5. You are now connected to the Wi-Fi network.

When I try to connect to Wi-Fi it says can’t connect to this network?

Connection problems can be due to a variety of reasons—problems with the website, your device, the Wi-Fi router, modem, or your Internet Service Provider (ISP). Check to see if there is a problem with the connection to your Wi-Fi router. Do this by using a ping test. Select Search on the taskbar, type Command prompt.

How do I find a hidden network on my iPhone?

How to Connect to a Hidden Wi-Fi Network

1. Open the Settings.
2. Tap Wi-Fi.
3. Enable your Wi-Fi by tapping the slider—if not yet enabled.
4. Hit Other under Networks.
5. Enter the hidden Wi-Fi network’s name, select the security type and enter the password.
6. Once done, tap Join in the upper right to connect.

How do I manually add a Wi-Fi network to my iPhone?

Apple iPhone – Add a Wi-Fi Network

1. From a Home screen, navigate: Settings. Wi-Fi. .
2. Ensure the Wi-Fi switch is on .
3. Tap the preferred network. If the preferred network isn’t listed, it can be added manually.
4. If prompted, enter the appropriate password then tap. Join. (upper-right).