Interesting

How do you use a Jabra car speaker?

How do you use a Jabra car speaker?

How do I pair my Jabra Freeway with my mobile device?

  1. Turn on the Bluetooth setting on your mobile device.
  2. Turn off your Jabra Freeway by sliding the On/off switch to the “off” position.
  3. To enter pairing mode, simultaneously press and hold (5 seconds) the Answer/end button and slide the On/off switch to “on”.

How do I connect my Jabra Cruiser to my stereo?

To enter pairing mode press and hold (5 seconds) the Answer/end button on your speakerphone until the light flashes blue and pairing mode is announced. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Cruiser from the list of available devices.

How do I pair my Jabra hands free?

Go to the Bluetooth menu on your phone . Turn on or enable Bluetooth . Search for devices and select your Jabra hands free device . Select pair or OK .

How do I reset my Jabra Cruiser 2?

Turn on your Jabra Cruiser2 by setting the On/off switch to the “on” position. Simultaneously press and hold (5 seconds) the Volume up, FM, and Answer/end buttons until you hear a beep tone. Turn off your Jabra Cruiser2 by setting the On/off switch to the “off” position. Your Jabra Cruiser2 is now reset.

How do you connect a Jabra speaker to your phone?

To enter pairing mode, press and hold (2 seconds) the Bluetooth button on the speakerphone. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Speak 510 from the list of available devices. Enter “0000” (four zeros) if you are asked for a pin code.

How do I make calls on my Jabra Bluetooth?

Press and hold the answer/end but- ton until Bluetooth connection indicator is flashing blue. Activate Bluetooth on your phone. Then set your phone to search for Bluetooth devices and select Jabra EASYVOICE. Press ‘OK’ on the phone and if your are asked for a PIN code, confirm with PIN 0000.

How do I reset my Jabra hands free?

When you reset your Jabra Evolve 65, previously paired devices and settings will be cleared. To reset, simultaneously press and hold (5 seconds) the Answer/end button and the Volume up button until the LED blinks green 5 times indicating the reset is complete.

How do I pair my Jabra Cruiser with my phone?

Android. Bluetooth can be turned on by going to Settings. You can pair a new device with Bluetooth by clicking “Pair new device”. Tap the Jabra headphones or headset that appear in the list, and your phone will pair with them.

How do I pair my Jabra Bluetooth speaker?

How do you sync a Jabra Bluetooth?

Turn on the Bluetooth setting on your mobile device. Turn off your headset. To enter pairing mode, press and hold the Answer/end button on your headset until the light turns blue. To pair, go to the Bluetooth menu on your mobile device and select the Jabra headset from the list of available devices.