What are the types of fills used in cooling tower?

What are the types of fills used in cooling tower?

There are two basic types of fill: splash fill and film fill. Splash fill is designed to interrupt the water and cause, as the name suggests, splashing. Film fill, on the other hand, is made up of sheets of material that the water travels across.

What is splash fill cooling tower?

Splash fills maximize the water-surface-to-air interface. The splash fill breaks the water into smaller droplets, continually exposing more water surface to the airflow. The splash fill also allows the water to stay suspended allowing greater time exposure to the air.

What is PVC fills for cooling tower?

Our standard fill is constructed of a honeycombed PVC film. This honeycomb construction ensures even water distribution and high efficiency water to air heat transfer. The PVC fill shall withstand a maximum inlet water temperature of 55°C.

Which fluid is generally used in cooling tower?

wet cooling towers or evaporative cooling towers operate on the principle of evaporative cooling. The working coolant (usually water) is the evaporated fluid, and is exposed to the elements.

What is the meaning of TR in cooling tower?

Ton of Refrigeration
Ton of Refrigeration (TR): Ton of Refrigeration (abbreviated as TR) is an important historical unit of refrigeration capacity. Originally 1 TR was defined as the rate of heat transfer required to make 1 short ton (2000 lbs) of ice per day from water at 0oC.

What is a drift eliminator in a cooling tower?

Drift eliminators are designed to capture large water droplets caught in the cooling tower air stream. The eliminators prevent the water droplets and mist from escaping the cooling tower.

What is louvers in cooling tower?

The primary function of the air intake louvers in a Cooling Tower is to act as a barrier for sunlight, noise, water splash-out and debris while also improving the airflow of the cooling tower and improving it’s appearance. They also lower the amount of splash out of your cooling tower which preserves your water.

What is LG ratio in cooling tower?

The L/G ratio of a cooling tower is the ratio between the water and the air mass flow rates. Cooling towers have certain design values, but seasonal variations require adjustment and tuning of water and air flow rates to get the best cooling tower effectiveness.

What is a drift eliminator?