What is a chain link tension band?

What is a chain link tension band?

Chain link fence tension bands are used to attach the chain link fabric, or fence to the terminal posts, i.e. end posts, corner posts and/or gate posts. They are also commonly used to attach chain link fabric to the uprights of gate frames, temp fence panels, and dog kennels.

What is a brace band on a chain link fence?

The galvanized steel brace rail band is used to help attach the top rail of your Chain-Link fence to the terminal posts and works to hold the top rail in centerline of fence. The brace band must be used in conjunction with a rail end.

What is the difference between brace band and tension band?

A: A tension band holds the tension bar and mesh. It is offset from the end post’s center to align with the mesh. A brace band holds the top rail and rail end cap. The brace band is aligned with the center of the end post.

What size tension band do I need?

The two most common ways to find the size needed is as follows: -If you are trying to measure the size of a band you already have. Pinch the two ends of the band together and measure the INSIDE of the band. -If you have the post you are going to mount the band, simply measure the OUTSIDE of the post.

How many tension bars do I need for chain link fence?

Two tension bars
Two tension bars are required for each stretch of chain link fabric. A bar must be installed at every corner, end, and gate post.

What is the difference between a brace band and tension band on a chain link fence?

Where do Brace bands go on chain link fence?

Practice and Installation: After posts are set, install brace bands with rail end cups on the bottom of the terminal post (corner, end, or gate post) and first line post at mid height (see note below).

How far apart should posts be on a chain link fence?

SPACING FENCE POSTS As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart—spacing should not exceed 10′ on-center. (fig.

How far apart should line posts be for chain link fence?