What is a leak detection survey?

Water leak detection surveys provide a non-destructive solution to finding hidden pipe leaks. In contrast to traditional leak detection methods of large-scale excavation, our leak detection surveys utilise specialist equipment.

What makes a leak detectable?

The most commonly used leak test methods are underwater bubble test, bubble soap paint, pressure and vacuum decay, and tracer gas detectors (halogen, helium and hydrogen).

Can you detect a water leak underground?

Look at your water meter for the leak indicator, which is often a small red, white, or blue triangle. The indicator spins when the house is using water. Because you shut off all water to the home, the triangle should be still. If it’s spinning, you have a leak underground.

Is leak detection Necessary?

In order to prevent serious damage being done through faulty pipes, it is essential to install a water leak system that will detect a problem before disaster hits. Water detection systems will alert you to even the smallest of leaks so that you can resolve them quickly.

How do I detect a water leak in my house?

Make sure no water is being used inside or outside of your house. Locate your water meter and check the leak indicator to see if it is moving. Depending on the brand of your meter, the leak indicator could be a small triangular shaped dial or a small silver wheel that rotates when water is flowing through the meter.

How do I locate a leaking water pipe?

6 Ways To Find Hidden Water Leaks

1. Check your water meter. One of the best ways to tell if you have a leak in some part of your plumbing is to check the water meter.
2. Look at your usage.
3. Monitor your bill.
4. Grab some food coloring.
5. Check exterior usage.
6. Use common sense.

How do I find a leak in my central heating system?

Visually inspect underneath and around the boiler The most obvious sign of a central heating leak is dripping around the boiler itself. Thoroughly check the boiler for any signs of water damage, being careful not to check pipes when they are hot and check all the boiler’s fittings.

How does water leak detection work?

Leak detection systems work by monitoring water flow through either a mechanical turbine or ultrasonic wavelengths. These leak detection systems observe the pattern of the water flow, either by counting the gallonage passing through the sensor or sonically recording the time delay.