What is BC547 transistor used for?

What is BC547 transistor used for?

BC547 Transistor Application BC547 is usually used for current amplifier, quick switching and pulse-width modulation (PWM). Therefore, if you need to control the speed of a motor or actuator in some of your projects, you can simply use this transistor to achieve it.

Is BC547 a NPN transistor?

BC547 is a Bipolar Junction Transistor, abbreviated as BJT. It is an NPN transistor. It has three terminals named as: Emitter.

How much is a BC547 transistor?

Name BC547 NPN Transistor
Code DI0009
Price Rs.8.00
In Stock Yes
Package THT

Can we use BC547 instead of c945?

Yes, absolutely! The BC547 has the same pinout and characteristics as a BC548 except for two things: The BC547 can tolerate higher voltages on the collector than a BC548.

Why BC547 transistor is used in water level indicator?

Water tank overflow is a common problem which leads to the wastage of water. In this project I am using the transistor based water level indicator circuit is very useful to indicate the water levels in a tank. If the water level is full, then the circuits beeps through the buzzer notifying that the water level is full.

How to make simple electronic circuits using transistor BC547?

Place Transistor on a breadboard

  • Connect Emitter to the ground of the battery
  • Add LED&330 Ohm Resistor to Collector of BC547
  • Connect 1k Resistor and Switch to Base of transistor
  • Power up the circuit with 9V Battery
  • What is the working of BC548 transistor?

    Transistors — such as the BC548 — may be used in circuits to amplify or switch the electrical signals that pass through them. The BC548 transistor is a semiconductor that works to switch electronic signals, and in some cases amplify them.

    How is BC547 packaging?

    Package-Type: TO-92

  • Transistor Type: NPN
  • Max Collector Current (IC): 100mA
  • Max Collector-Emitter Voltage (VCE): 45V
  • Max Collector-Base Voltage (VCB): 50V
  • Max Emitter-Base Voltage (VEBO): 6V
  • Max Collector Dissipation (Pc): 500 milliwatt
  • Max Transition Frequency (fT): 300 MHz
  • Minimum&Maximum DC Current Gain (hFE): 110 – 800
  • What is a BC548 transistor?

    Introduction to BC548. BC548 is an NPN general-purpose transistor, comes with three pins named emitter, base and collector. A small current at the base side is used to control large current at the collector and emitter terminals. The reason, it’s normally called a current controlled device.