Is Dricore Smartwall worth?

Dricore SmartWall was a very good choice, even when calculating versus a framed-wall and standard drywall with an equivalent barrier and insulation R value, it looks like Smartwall is only going to be a small amount more expensive in terms of materials. The panels save a lot of time on exterior walls.

Can you paint Dricore Smartwall?

DRICORE SMARTWALL® is a panelized system. Each panel is 21.75” wide and comes in standard 8′ length. Panels can be cut to fit any desired ceiling height or basement layout. When finished, DRICORE SMARTWALL® will be ready to be painted to suit your taste.

Can you build walls on Dricore subfloor?

An interior stud wall can be set right on top of your new DRICORE® subfloor and is in fact, the preferred method of installation. Note: If you are planning to use metal studs in place of wood, the base track for the studs should be affixed to the DRICORE® panels with 1/2″ wood screws as a maximum.

Do you need to screw down Dricore subfloor?

Remember that DRIcore must be installed as a floating floor. Normally it is not recommended to nail, glue or screw DRIcore panels to the concrete surface. In some instances, we suggest minimal fastening of the panels to the concrete surface.

Can you screw down DRIcore?

Can you build a wall on DRIcore?

Making Interior Walls An interior stud wall can be set right on top of your new DRICORE® subfloor and is in fact, the preferred method of installation. Install your 2X4 frame directly on top of the subfloor, measuring for a “snug” fit between the subfloor and ceiling.

Can you install carpet over DRIcore?

Install pad and carpet. Do not glue the underpad or carpet directly to the DRICORE® panels. Install the floor manufacturer’s approved underlayment for use over a wood subfloor and then proceed with the finished flooring on top of the DRICORE® panels.

Do I need a vapor barrier with DRIcore?

06 perms or less. In the past I’ve used a vented insulated floor system (like DriCore R+) without any special attention to a vapor barrier. In fact DriCore prohibits adding a second vapor barrier. Vapor barrier BELOW the slab means a dry slab most of the year in our climate.

How many DRIcore panels do I need?

Estimating is easy. The total square footage of your room divided by 3.3 equals the number of panels you need. This factor includes an allowance for normal wastage and cutting around obstacles and pipes. To calculate how many panels you need.