What is IPMI v2 0 password disclosure?
What is IPMI v2 0 password disclosure?
Description. The remote host supports IPMI v2. 0. The Intelligent Platform Management Interface (IPMI) protocol is affected by an information disclosure vulnerability due to the support of RMCP+ Authenticated Key-Exchange Protocol (RAKP) authentication.
What is IPMI protocol?
The Intelligent Platform Management Interface (IPMI) is a set of computer interface specifications for an autonomous computer subsystem that provides management and monitoring capabilities independently of the host system’s CPU, firmware (BIOS or UEFI) and operating system.
What is SSL version 2 and 3 protocol detection?
Description The remote service accepts connections encrypted using SSL 2.0 and/or SSL 3.0. These versions of SSL are affected by several cryptographic flaws. An attacker can exploit these flaws to conduct man-in-the-middle attacks or to decrypt communications between the affected service and clients.
How do I use IPMI?
How to setup IPMI
- Plug in an Ethernet cable into a port on your motherboard and the other end to your network switch.
- Access the bios by pressing the delete key when presented with the Supermicro splash screen when booting the Storinator.
- Go to the IPMI tab, then to BMC Network Configuration.
How is IPMI used?
IPMI is a hardware solution for controlling and managing your servers. It has significant differences and benefits compared to system diagnosis software. For example, IPMI gives you the ability to manage servers in remote physical locations regardless of the installed operating system.
What is the difference between BMC and IPMI?
The baseboard management controller (BMC) sits between on-board sensors and interfaces and out-of-band communication interfaces such as Ethernet. IPMI addresses a range of interfaces including the use of the Intelligent Platform Management Bus/Bridge (IPMB) to communicate with sensor and control devices.
What is the current SSL version?
While TLS 1.2 is currently the most widely-used version of the SSL/TLS protocol, TLS 1.3 (the latest version) is already supported in the current versions of most major web browsers. Use a Short List of Secure Cipher Suites: Choose only cipher suites that offer at least 128-bit encryption, or stronger when possible.
What is SSL RC4 cipher suites?
Vital Information on This Issue
| Vulnerability Name: | SSL RC4 Cipher Suites Supported |
|---|---|
| Impact: | |
| Solution: | Reconfigure the affected application, if possible, to avoid use of RC4 ciphers. Consider using TLS 1.2 with AES-GCM suites subject to browser and web server support. |
| CVE: | CVE-2013-2566 CVE-2015-2808 |
What is an IPMI address?
The official definition of IPMI (short for Intelligent Platform Management Interface) is a set of standardized specifications for hardware-based platform management systems making it possible to control and monitor servers centrally. The simpler definition is that IMPI is a security guard for your server.
What is IPMI console?
ipmiconsole is a Serial-over-LAN (SOL) console utility. It can be used to establish console sessions to remote machines using the IPMI 2.0 SOL protocol. Ipmiconsole communicates with a remote machine’s Baseboard Management Controller (BMC) to establish a console session.
What are IPMI alerts?
Oracle ILOM supports alerts in the form of IPMI Platform Event Trap (PET) alerts. Alerts provide advance warning of possible system failures. Alert configuration is available from the SP on your server.
Is IPMI same as iLO?
IPMI is a standard. DRAC is a proprietary offering from Dell. ILO is the HP ProLiant variant. The proprietary lights-out management solutions provide more integration with the hardware and often time have nicer features (monitoring, logging, access) than a generic IPMI implementation.