How do I set up SPA122?
How do I set up SPA122?
- Using a LAN/Ethernet cable, connect the computer to the yellow Ethernet (LAN) port of the SPA122.
- Open Internet Explorer browser (IE is required to ensure the adapter’s configuration page displays properly).
- Log in: admin / (administrator password)
- Click Voice > Provisioning.
- Click Submit.
How do I get IP for SPA122?
At the voice prompt menu, enter 110 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration. At the voice prompt menu, enter 210 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration.
How do I access Spa 112?
How to access the web configuration utility on the Cisco SPA112
- Open a web browser and enter the IP address of the phone adapter in the address bar, then press Enter.
- Enter the username of the device in the Username field.
- Enter the password of the device in the Password field.
How do I set up an ATA device?
Step 1 Connect the network cable to your network and to the NETWORK port on the ATA. Step 2 Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine). If connecting a fax machine, connect it directly to the ATA.
How do I reset my SPA122?
RESET — Press the Reset button to restart the SPA122 device. To restore it to factory default settings, hold the button for 20 seconds.
How do I log into network configuration utility?
To open the web-based configuration utility: Open a Web browser. Enter the IP address of the WAP device that you are configuring in the address bar on the browser, and then press Enter. The Login page opens.
How do I factory reset my Cisco SPA122?
What type of port does an ATA have?
The digital interface of the ATA typically consists of an Ethernet port to connect to an Internet Protocol (IP) network, but may also be a USB port for connecting the device to a personal computer.
How do I reset my Cisco ATA to factory settings?
Dial the following IVR code using the phone keypad: 73738 (RESET) followed by the # key. The IVR will ask you to confirm by pressing the 1 on the phone keypad. You must hang-up the phone to commence the reboot sequence.
What is network configuration Utility?
The Network Configuration Utility (NCU) configures a system’s Network Interface Card (NIC), TCP/IP settings, and domain information for use in Recovery Environment. Note: The PE Network Manager provides a comprehensive set of network options. However, most Recovery Environment scenarios work with the default settings.