How far can wood span without support?

A general rule of thumb for joist span is 1-1/2 times a board’s depth in feet, however, it’s not that simple. The distance a 2×6 can span is determined by the species, grade, location, use, load, and spacing. Based on building codes, a 2×6 can span anywhere from 2′-1” to 20′-8” depending on the affecting factors.

How far can a wooden beam span?

2-grade 2×6 joists can span up to 10 feet 9 inches from beam to beam when spaced the standard 16 inches apart with a maximum live load of 30 inches per square foot.

How far can a 250 UB span?

West Australian owned and operated

How long can a wood joist span?

Floor joist span is the length of an individual joist, from the foundation walls to an interior beam. The spacing between joists is typically 16”, but can also be 12”, 20”, and 24”. The spacing and ability to span a greater – or smaller – distance is dependent on the size of lumber used for the joists.

How far can 6×2 timber span?

A 2×6 joist can span anywhere between 8′ for Cedar and Redwood to 9′ for Pine and Fir at 16″ OC. 12″ OC yields longer spans, while 24″ OC allows shorter spans.

What distance can a 2×4 span?

A 2×4 can span a maximum of 6′ 7” when spaced 16” apart and used as a floor or deck joist. When used as a ceiling joist or a roof rafter, a 2×4 can span up to 7′ 3” spaced at 16”, and 6′ 4” when spaced 24” apart.

How far can c purlin span?

A four-inch purlin can span 12 feet. A six-inch purlin can span 18 feet. An eight-inch purlin can span 25 feet. A ten-inch purlin can span 30 feet.

Can a 2X10 span 16 feet?

The length of one 2×10 joist span depends on the wood species and how far apart it is from the next 2×10. A 2×10 southern yellow pine joist can span 16 feet and 1 inch without support. A doubled 2×10 beam can span 11′ without support for a deck that is 4′ wide.