How do you test a PoE camera?

Connect an ethernet cable from your PC’s network port to the Data/In on the PoE injector. Connect a second ethernet cable from the network camera’s RJ45 network jack to the port labeled PoE or P+D/Out. To check if everything is connected properly refer to the lights on the PoE injector and the port on your computer.

Can I plug PoE camera into router?

PoE (Power over Ethernet) means you can just use a single network cable for both video and power transmission. So just connect the camera to the router via the network cable, and the camera will get power supply and network access.

How to test an IP camera?

The combination of touch screen and key buttons make the IP camera tester very user-friendly. The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP address searching. You can use the blue cable tracer to locate individual connected cables from a bundle of cables.

Which IP cameras are supported by the IPC test app?

Note: Currently, the IPC Test App only supports some brands’ specific IP cameras; these include specific models made by ACTI, AXIS, Dahua, Hikvision, Samsung, and many more. If the camera is not fully integrated, please use the ONVIF or RTSP apps.

What if there are any questions or problems with the IP camera?

If there are any questions or problems while using the IP camera tester please call 855-388-7422 or email [email protected] for support. Contents 1 .Safety information ———————————————————————————————— 1 2.

Where can I find the IP camera tester for Northern video?

IP7TM2 7” IP, TVI, CVI, AHD & 960H Service Monitor USER GUIDE Rev. 091021 2995 Foothills Blvd. Ste 200, Roseville, CA 95747 ♦855-388-7422 ♦www.northernvideo.com Thank you for purchasing the IP camera tester. Please read this manual before using the IP camera tester to insure proper use.