# Can you replace a start capacitor with a higher UF?

## Can you replace a start capacitor with a higher UF?

An electric motor start capacitors can be replaced with a micro-farad or UF equal to or up to 20% higher UF than the original capacitor serving the motor.

## What happens if start capacitor is too big?

Much the same way, a motor will not run properly with a weak capacitor. This is not to imply bigger is better, because a capacitor that is too large can cause energy consumption to rise. In both instances, be it too large or too small, the life of the motor will be shortened due to overheated motor windings.

What size start capacitor do I need?

“Multiply 0.5 times the square of the voltage. Call this result “x.”. Continuing the example, you have 0.5 times 11.5 volts times 11.5 volts, or 66.1 square volts for “x”. Divide the start-up energy requirement, in joules, of the motor by “x” to arrive at the capacitor size needed in farads.”

### Is there a difference between start and run capacitors?

The start capacitor creates a current to voltage lag in the separate start windings of the motor. The current builds up slowly, and the armature has an opportunity to begin rotating with the field of current. A run capacitor uses the charge in the dielectric to boost the current which provides power to the motor.

### Can I use a different uF capacitor?

As long as the microfarad rating is within 10% of the correct capacitor, yes. If you have a 5 microfarad capacitor, the highest the new capacitor can be is 5.5 microfarads. And you need to write on the fan, visible, that the original capacitor was a 5 microfarad capacitor.

Can I use lower uF capacitor?

Can you replace a start capacitor with a lower uF? – Quora. But of course you can. It might not work, it might damage something else, but you ‘can. ‘ Replacing with a slightly higher uF should be fine however.

## How do I choose a start capacitor?

Select a capacitor with a voltage rating at or above the original capacitor. If you’re using a 370 volt capacitor, a 370 or 440 volt one will work. The 440 volt unit will actually last longer. A capacitor will have a marked voltage indicating the accpetable peak voltage, not operational voltage.

## What does 30 uF mean on a capacitor?

uF refers to the size of the capacitor. 1.5 & 2.5 uf It means microfarads and is the amount of electrical energy that a capacitor is able to store for later use and in this case is used to give a boos and help to stay running (the ceiling fan ).

Can you oversize a run capacitor?

Larger than needed microfarad values will not cause much of any problems (especially for a start capacitor). A larger than needed run capacitor will not have any real affect. Depending on the cap and motor it could improve efficiency or decease efficiency very slightly.