Why does my Cisco AnyConnect VPN keep disconnecting?

Why does my Cisco AnyConnect VPN keep disconnecting?

The most common cause of a VPN disconnect is a local network connectivity issue. If your connection is not idle, there is an 18 hour VPN connection limit. Click on the Cisco AnyConnect tray icon to see how much time remains on your current VPN session.

How do I stop Cisco VPN from disconnecting?

As the computer goes to sleep, any active VPN connection will be disconnected. By default your display will turn off after several minutes of inactivity. You can disable this behaviour by going to System Preferences->Energy Saver and tick the “Preventing computer from sleeping automatically when the display is off”.

Why does my VPN keeps getting disconnected?

This happens because the ping packets are being either lost or blocked on the path between your device and the server. This could be a software or hardware router filtering these packets or an unreliable Internet connection which is causing packet loss.

Does Cisco VPN timeout?

AnyConnect version 4.8. 02045, released in February 2020, increases the default timeout from 12 to 30 seconds.

How do I fix Cisco VPN Problems?

How do I fix the Cisco VPN issues on Windows 10?

  1. In the Windows Search bar, type Control and open Control Panel.
  2. Click Uninstall a program in the bottom left corner.
  3. Click on the Cisco System VPN client and choose Repair.
  4. Follow the instructions until the installation is repaired.

What happens if VPN disconnects?

So, if you get disconnected while running a VPN connection, the device will not automatically reconnect to the Internet unless the VPN can connect to the server first. This might prevent your device to successfully connect to the Internet, even though it could safely do so with another server.

How do I keep my VPN connection alive?

How to keep my VPN running all the time?

  1. Launch your VPN client (we used Private Internet Access)
  2. Access its configuration screen.
  3. Make sure to enable the VPN to run at startup.
  4. Toggle the Connect on Launch feature if available (could be named differently)
  5. Look for the kill switch feature and enable it.

How do I stop my VPN from turning off?

Go to Settings > Network & internet. Tap on VPN. Toggle off VPN.

How do I increase my VPN timeout limit?

1 Answer

  1. Open “Routing and Remote Access”
  2. Right Click “Remote Access Logging & Policies”
  3. Click “Launch NPS”
  4. Once “Network Policy Server” open’s click “Network Policies”
  5. Right click “Forefront TMG Default Policy” and select “Properties”
  6. Move to the “Constraints” tab.

How long does Cisco AnyConnect stay connected?

Will my VPN connection timeout after a set period of time? Yes, your VPN connection will timeout after 30 minutes of inactivity. As long as the VPN tunnel is being used you will stay connected.