What is RSRP in 3g?

What is RSRP in 3g?

RSRP is the received power of 1 RE (3GPP definition) average of power levels received across all Reference Signal symbols within the considered measurement frequency bandwidth. RSSI is measured over the entire bandwidth.

What is more important RSRQ or RSRP?

Many devices show RSSI for LTE connections along with RSRP, but RSRP is a better indicator of signal strength. RSRQ is Reference Signal Received Quality. This again only applies to 4G LTE networks and is a measure of the signal quality of a cellular connection.

What is RSRP and RSRQ in LTE?

RSRP – The average power received from a single Reference signal, and Its typical range is around -44dbm (good) to -140dbm(bad). RSRQ – Indicates quality of the received signal, and its range is typically -19.5dB(bad) to -3dB (good).

How do you calculate RSRQ in LTE?

RSRQ = N*(RSRP/RSSI) or RSRQ = 10LO(N) + RSRP(dBm) – RSSI(dBm)

  1. N = Number of RBs as per Channel Bandwidth. N=6 for 1.4 MHz. N=15 for 3 MHz. N=25 for 5 MHz.
  2. RSRP= Average Received Signal Power of a a Singel Resource Element (RE) – In LTE there are 84 RE in a single RB.
  3. RSRQ=Power measured over the entire BW of occuped RBs.

How can I improve my Rsrq in LTE?

How Can I Improve My 4G LTE or 5G Speed?

  1. Get a New Phone/Hotspot. If you’re using an old device, a new phone or hotspot may allow you to connect to new bands.
  2. Use External Antennas. Many hotspots from major carriers like AT, Verizon, Sprint and T-Mobile support external antenna ports.
  3. Use a Signal Booster.

What is Rsrq in telecom?

The LTE specification defines a second value, RSRQ (Reference Signal Received Quality), as the ratio of the carrier power to the interference power: essentially this is a signal-noise ratio measured using a standard signal.

How can I improve my RSRP in LTE?

Use a Signal Booster If you are using a phone, the best option for improving data rates is a signal booster. Cell phone signal boosters amplify your signal, increasing the signal strength (RSRP). When used in tandem with external antennas, they can allow for wireless rebroadcast of improved signal indoors.

How is RSRP calculated in LTE?

RSRP (Reference Signal Received Power) is an average received power of a single Reference Signal resource element. Maximum RSRP value can be calculated based on maximum input UE power UE which is -25 dBm and minimal LTE bandwidth which is 1.4 MHz, i.e. 72 resource elements. Then -25 – 10*LOG(72) = -44 dBm.

How can I improve my RSRQ in LTE?

How does UE measure RSRP?

RSRP is the average received power of a single RS resource element.

  • UE measures the power of multiple resource elements used to transfer the reference signal but then takes an average of them rather than summing them.
  • The reporting range of RSRP is defined from -140 dBm to – 44 dBm with 1 dB resolution.